Radial-drilling machine GS545

The machine is designed for processing holes in small, medium, and large parts at an angle of ±45º in the hud plane.

The machine can perform drilling, countersinking, reaming, threading in steel, cast iron, and other metals and alloys, with the exception of those alloys, the processing of which can lead to a fire hazard.

Denomination	Data
Largest drilling diameter in steel to 45 GOST1050, mm	45
Largest diameter of the cut thread (Steel 45)	М24
Spindle overhang (distance from the spindle axis to the generating column, measured in a plane parallel to the arm guides and passing through the column axis), mm
most, no less	1100
least, no more	320
Drilling radius (distance from the spindle axis to the column axis), mm:
most, no less	1220
least, no more	470
Distance from the lower end of the spindle to the base mirror, mm:
most, no less	1250
least, no more (lower than plate mirror)	-60
Number of spindle speed steps	12
Spindle speed steps, rpm	45, 63, 90, 125, 180,
	250, 355,500, 710,
	1000, 1400, 2000
Number of spindle feed steps	4
Spindle mechanical feed, mm/rev	0,056; 0,1; 0,18; 0,32
Maximum torque on the spindle, Nm	180
Maximum feed force, kN	12
Main drive power, kW	3
Overall machine dimensions, mm
length	1800
width	925
height	2260
Weight of the machine without attachments, supplied for a fee, kg, no more	1480
Column
Column diameter, mm	220
Arm
Most vertical movement of arm hub along the column, mm	1060
Total rotation angle of the arm around the axis of the column (vertical axis)	360º
Clamp on column	manual
Drill head
Most stroke on the arm guides, mm	780
Total rotation angle of the drilling head around the horizontal axis	±45º
Head clamp on arm guides	manual
Spindle
Spindle stroke, mm: maximum	250
per turn of handwheel	100, 48
per limb division	1
for tool knockout, no more	15
Internal spindle taper	Morse 4 АТ6 GOST 25557
Foundation plate
Working surface size, mm:
width	760±3
length (to column flange)	1250±5
height	206±2
Number of grooves	3
Groove width according to GOST 1574, mm	18
Distance between grooves, mm	160
Detachable rectangular table
Working surface size, mm:
horizontal	360х500
vertical	400х500
Groove width, mm	14Н12
Distance between grooves, mm	100
Number of grooves on the surface
horizontal	3
vertical	3

Designation	Denomination	Number	Note
545.0000.000	Complete machine	1
Included in the kit and the cost of the machine
2К52-1.90.00000	Rotary handle	1
2К52-1.89.10.000	Electric box wrench	1
007.2000.001	Drain plug wrench	1
	Wrench 7811-0024 GOST 2839	1
	Wedge 7851-0012 GOST 3025	1
	Sleeves GOST 13598
	6100-0142	1	3/1
	6100-0144	1	4/2
	6100-0145	1	4/3
Documents (included in the kit and the cost of the machine)
545.0000.000РЭ	Manual	1*
	A set of documents for purchased equipment (supplier's documentation)	1
Accessories (supplied upon request of the customer for a fee)
2К52-1.0000.011	Removable box table with a set of fasteners	1
	Vise 7200-0215 GOST 16518 with a set of fasteners	1
	Drill chuck 6150-7003 TU RB 00223728.021	1
045.0730.000	Thread-cutting chuck with set of safety sockets М5…М12	1
* When delivered for export in the quantity and in the language according to the order - along with.
Two copies in Russian in the absence of special requirements.
Possible to replace the included accessories with accessories with the same technical data.

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022