Vertical drilling machine model 2Т125

The machine is designed for processing holes in small and medium-sized parts.

The machine is designed for drilling, reaming, countersinking, and tapping in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which on the machine can lead to a fire hazard.

Processing on the machine is carried out both with manual and mechanical spindle feed. Threading is allowed with manual control of spindle reversal and in automatic mode at a given thread depth.

Following GOST 15150, the nominal value of the ambient air temperature during machine operation is +1°С…35°С.

Relative air humidity should not exceed 80% at +25°С.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Maximum permissible operating modes:

maximum torque on the spindle..............(60±10) Nm

maximum axial cutting force………………………… (6000±1000) N

Largest processing diameter in various materials:

holes in steel 45……………25 mm

holes in cast iron GI20 ………………………… 32 mm

cut thread (St 45)……………………………………..… М20

Machine exploitation beyond the scope of what is specified in this manual is

permitted.

Denomination	Data
Largest apparent drilling diameter, mm
in steel 45 GOST 1050	25
in cast iron GI 20 GOST 1412	32
Largest diameter of the cut thread (Steel 45)	М20
Distance from the spindle axis to the generating column (overhang), mm	260
Distance from spindle nose to table surface, mm
most, no less	0
least, no more	810-5
Distance from spindle nose to the plate, mm
least, no more	940-5
most, no less	1100-5
Number of speed steps	8
Number of spindle feed steps	3
Spindle speed steps, rpm	80,125,200,310,500
	800,1250,2000
Spindle mechanical feed, mm/rev	0,1; 0,2; 0,3
Maximum torque on the spindle, Nm, no less	70
Maximum spindle feed force, N	6000
Main drive power, kW	1,5
Overall machine dimensions, mm, no more
length	770
width	540
height	2140
The weight of the machine without accessories supplied for a fee, kg, no more	450
Column
Column diameter, mm	120
Table
Working surface dimension, mm	400×500
Most movement of the table along the column, mm	670
Rotation angle of the table with the bracket around the axis of the column in the position of the bracket above the pump	180º
Number of grooves	2
Groove width according to GOST 1574	14
Distance between grooves, mm	160
Clamp on column	manual
Spindel
Spindle inner taper	Morse 3
Spindle stroke, mm: most	160
per 1 limb turn	100,48
per 1 limb division	1
Foundation plate
Working surface size, mm:
width	525
length (to column flange)	500
height	140
Number of grooves	2
Groove width according to GOST 1574	14
Distance between grooves, mm	200

Designation	Denomination	Number
010.0000.000	Complete machine	1
Tools and accessories
	Sleeves GOST 13598-85
	6100-0142	1
	6100-0143	1
	Wedge 7851-0012 GOST 3025-78	1
2К52-1.9000.000	Handle	1
2К52-1.89.10.000	Electric box wrench	1
007.2000.001	Drain plug wrench	1
Documents
010.0000.000РЭ	Manual	1
010.0000.000РЭ	A set of documents for purchased equipment (supplier's documentation)	1
Supplied upon request of the customer for a fee
	Vise 7200-0215 GOST16518-96 with a set of fasteners	1
	Drill chuck 6150-4029-03	1
	TU RB 0022.3728.021-95	1
045.0730.000	Thread-cutting chuck	1
	Heads TU RB 00223728.001
	6251-4002-02 (М5)	1
	6251-4002-03 (М6)	1
	6251-4002-04 (М8)	1
	6251-4002-05 (М10)	1
	6251-4002-06 (М12)	1
Possible to replace the included accessories with accessories with the same technical data.

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022

4.18 Mb

.pdf