Bench drilling machine model 2T118, 2T118-01

The machine is designed for processing holes in small and medium-sized parts.

The machine is designed for drilling, reaming, countersinking, and tapping in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which on the machine can lead to a fire hazard.

Following GOST 15150-69, the nominal value of the ambient air temperature during machine operation is +1°С…35°С.

Relative air humidity should not exceed 80% at +25°С.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Maximum permissible operating modes:

maximum torque on the spindle..(33 +2) Nm

maximum axial cutting force………………………… (4000 + 500) N

Largest processing diameter in various materials:

holes in steel 45……………18 mm

holes in cast iron GI20 ………………………… 20 mm

cut thread (St 45)……………………………………..… М16

When working in the thread cutting mode, the number of spindle rotation reversals should be no more than 10 times per 1 minute. Spindle reversal should be performed at a speed of no more than 800 rpm.

Denomination	Model data
	2Т118	2Т118-01
Largest apparent drilling diameter, mm	18
Thread range	М4 - М16
Distance from the spindle axis to the generating column (overhang), mm, no less	195
Distance from the lower end of the spindle to the working surface of the plate; mm:
most, no less	500
least, no more	100
Most spindle stroke, mm	110
Most drill head stroke, mm	300
Spindle taper size	Morse 2 GOST25557
Working surface dimension of the plate, mm
width	250
length	250
Number of T-grooves on the plate	2
Distance between grooves	100
Groove width, mm	14 Н14
Number of spindle speeds	6
Spindle speed limits, rpm	200, 315, 500, 800, 1200, 2100
Number of spindle feeds	2
Spindle feed rates, mm/rev	0,1; 0,2
Overall dimensions of the machine (without pedestal and tool cooling system), mm, no more
width	465
length	665
height	1285
Machine weight (without pedestal and tool cooling system), kg, no more	150
Electrical equipment characteristics
Type of supply current	three-phase, alternating
Current frequency, Hz	50± 1
Voltage, V
supply network	380±38
control circuit	24
lighting circuit	24
alarm circuit	24
Electric motors characteristics
main drive
rated power, kW	0,75
rotation frequency, rpm	1500 synchronous
Electric pump
rated power, kW		0,18
rotation frequency, rpm		3000
		synchronous
Electrical equipment class to GOST 12.2.007.0-7	1
Pedestal dimensions (L x H x H), mm, no more	505х405х720
Pedestal weight, kg, no more	38
Cooling system dimensions (L x B x H), mm, no more		350х250х365
Cooling system weight, kg		10,5

Designation	Denomination	Number for model
Designation	Denomination	2Т118	2Т118-01
032.0000.000	Complete machine	1
032.0000.000-01	Complete machine		1
Tools and accessories
	Sleeve 6100-0141 GOST 13598	1	1
	Wedge 7851-0012 GOST 3025	1	1
	Electric box wrench 2К52-1.89.10.000	1	1
	Lamp М024-60У2 ТУ РБ 00214280.002	1	1
Documents
032.0000.000 РЭ	Drilling machines models	1	1
	2Т118 and 2Т118-01
	Manual
Supplied upon request of the customer for a fee
036.6000.000	Pedestal	1	1
	Vise 7200-0210 GOST16518	1	1
	Drill chuck 6150-7003-01	1	1
	TU RB00223728.021	1	1
	Mandrel 6039-0012 GOST 2682	1	1
	Thread-cutting chuck 045.0730.000	1	1
	Heads TU RB 00223728.001
	6251-4002-01 (М4)	1	1
	6251-4002-02 (М5)	1	1
	6251-4002-03 (М6)	1	1
	6251-4002-04 (М8)	1	1
	6251-4002-05 (М10)	1	1
	6251-4002-06 (М12)	1	1
Possible to replace the included accessories with accessories with the same technical data.

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022