Vertical drilling machine model 2T140

The machine is designed for processing holes in small and medium-sized parts.

The machine is designed for drilling, reaming, countersinking, and tapping in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which on the machine can lead to a fire hazard.

Processing on the machine is carried out both with manual and mechanical spindle feed. The machines are equipped with a mechanism for turning off the mechanical feed when the specified processing depth is reached.

Threading is allowed with manual control of spindle reversal and in automatic mode at a given thread depth.

Following GOST 15150, the nominal value of the ambient air temperature during machine operation is +1°С…35°С.

Relative air humidity should not exceed 80% at +25°С.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Maximum permissible operating modes:

maximum torque on the spindle..............(150+10) Nm

maximum axial cutting force………………………………..……. (11400+1000) N

Largest processing diameter in various materials:

holes in steel 45……………40 mm

holes in cast iron GI20 ………………………… 45 mm

cut thread (St 45)……………………………………..… М24

Denomination	Data
Largest apparent drilling diameter, mm
in steel 45 GOST 1050-88	40
in cast iron GI 20 GOST 1412-85	45
Largest diameter of the cut thread (Steel 45)	М24
Distance from the spindle axis to the generating column (overhang), mm	300±1
Distance from spindle nose to table surface, mm
most, no less	0
least, no more	700
Distance from spindle nose to the plate, mm
least, no more	710
most, no less	1100
Number of speed steps	8
Number of spindle feed steps	3
Spindle speed steps, rpm	75,120,180,300,450
Spindle speed steps, rpm	710,1150,1800
Spindle mechanical feed, mm/rev	0,1; 0,2; 0,3
Maximum torque on the spindle, Nm, no less	150
Maximum spindle feed force, N	11400
Main drive power, kW	2,2
Overall machine dimensions, mm, no more
length	950
width	560
height	2200
Column
Column diameter, mm	145
Table
Working surface dimension, mm	500 x 500
Most movement of the table along the column, mm	500
Rotation angle of the table with the bracket around the axis of the column in the position of the bracket above the pump	180º
Rotation angle of the table around its axis, degrees	300º ± 5º
Number of grooves	2
Groove width according to GOST 1574-75	14
Distance between grooves, mm	160
Clamp on column	manual
Drill head
Most movement of the drilling head along the column, mm	240
Clamp head on column	manual
Spindel
Spindle inner taper	Morse 4
Spindle stroke, mm: most	160
per 1 limb turn	100,48
per 1 limb division	1
Foundation plate
Working surface size, mm:
width	560
length (to column flange)	560
height	140
Number of grooves	2
Groove width according to GOST 1574	14
Distance between grooves, mm	250
The weight of the machine without accessories supplied for a fee, kg, no more	575

Designation	Denomination	Number
015.0000.000	Complete vertical drilling machine	1
Tools and accessories
	Sleeves GOST 13598-85
	6100-0142	1
	6100-0144	1
	6100-0145	1
	Wedge 7851-0012 GOST 3025-78	1
2К52-1.9000.000	Handle	1
2К52-1.89.10.000	Electric box wrench	1
2К52-1.0900.036	Drain plug wrench	1
Documents
015.0000.000РЭ	Manual	1
015.0000.000РЭ	A set of documents for purchased equipment (supplier's documentation)	1
Supplied upon request of the customer for a fee
	Vise 7200-0215 GOST 16518-96 with a set of fasteners	1
	Drill chuck 6150-4029-03	1
	ТУ РБ 0022.3728.021-95	1
045.0730.000	Thread-cutting chuck	1
	Heads TU2.035.0223723.001-90
	6251-4002-02 (М5)	1
	6251-4002-03 (М6)	1
	6251-4002-04 (М8)	1
	6251-4002-05 (М10)	1
	6251-4002-06 (М12)	1
Possible to replace the included accessories with accessories with the same technical data.

2018-12-14 2Т140

1.03 Mb

.rar

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022

4.18 Mb

.pdf