Bench drilling machine model GS2116K

The machine model GS2116K and its modifications (hereinafter - machine) is designed for processing holes in small and medium-sized parts.
The machine is designed for drilling, reaming, countersinking, and tapping in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which on the machine can lead to a fire hazard.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Maximum permissible operating modes:

maximum torque on the spindle.. 30 Nm
maximum axial cutting force………………………… 4000 N
Maximum Power Consumption..........................0.75kW
Largest processing diameter:
drilling in steel 45……………18 mm
drilling in cast iron GI20………………………… 20 mm
threading in steel 45……………………………………..… М12

When working in the thread cutting mode, the number of spindle rotation reversals should be no more than 10 times per 1 minute.

In the designation of the machine, after "GS2116K" letters are given:
V - inner cone of the spindle
N - outer cone of the spindle
O - equipment with a tool cooling system
T - equipment with a pedestal

Denomination	Parameter value
Largest apparent drilling diameter, mm	18
Thread range	М4 - М12
Distance from the spindle axis to the generating column (overhang), mm, no less	190
Distance from the lower end of the spindle to the working surface of the plate; mm:
most, no less	400
least, no more	100
Most spindle stroke, mm	100
Most drill head stroke, mm	200
Spindle taper size	Morse 2 GOST25557
	or V18 GOST 9953
Working surface dimension of the plate, mm
width	250
length	250
Number of T-grooves	2
Distance between grooves	100
Groove width, mm	14 Н14
Number of spindle speeds	6
Spindle speed limits, rpm	200, 320, 560,
	800, 1200, 2100
Overall dimensions of the machine (without pedestal and tool cooling system), mm, no more
width	460
length	640
height	1260
Machine weight (without pedestal and tool cooling system), kg, no more	140
Electrical equipment characteristics
Type of supply current	three-phase, alternating
Current frequency, Hz	50± 1
Voltage, V
supply network	380±38
control circuit	24
lighting circuit	24
alarm circuit	24
Electric motors characteristics
main drive
rated power, kW	0,75
rotation frequency, min -1	1500 synchronous
Electric pump
rated power, kW	0,18 *
rotation frequency, min -1	2800 *
Electrical equipment class to GOST 12.2.007.0-75	1
Pedestal dimensions (L x H x H), mm, no more	505х405х720
Pedestal weight, kg, no more	38
Cooling system dimensions (L x B x H), mm, no more	350х250х365
Cooling system weight, kg	10,5
* For machines with a tool cooling system

Designation	Denomination	Number	Note
036.0000.000	Complete machine	1
Tools and accessories
	Sleeve 6100 – 0141 GOST 13598-85	1
	Wedge 7851 – 0012 GOST 3025 – 78	1
	Electric box wrench 2К52-1.89.10.000	1
	Lamp М024 – 40U2 TU RB 00214280/002-93	1
Documents
036.0000.000РЭ	Manual
At the request of the consumer, the machine can be supplied with
	Vise 7200-0210 GOST 16518 – 96
	Drill chuck 6150 – 4029-01
	TU RB 00223728.021-95
	Mandrel 6039 – 0012 GOST 2682 – 86
	Thread-cutting chuck 045.0730.000
	Heads TU RB 00223728.001 – 98
	6251 – 4002 - 01
	6251 – 4002 – 02
	6251 – 4002 – 03
	6251 – 4002 – 04
	6251 – 4002 – 05
	6251 – 4002 – 06
Possible to replace the included accessories with accessories with the same technical data.