Bench drilling machine model GS2112

The machine model GS2112 (hereinafter - machine) is designed for drilling, countersinking, and reaming holes in small parts.

The machine is designed for drilling, reaming, countersinking, and tapping in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which on the machine can lead to a fire hazard.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Maximum Power Consumption..........................0.55kW

Largest processing diameter:

drilling in steel 45……………12 mm

drilling in cast iron GI20………………………… 15 mm

In the designation of the machine, after "GS2112" letters are given:

O - equipment with a tool cooling system

T - equipment with a pedestal

OT - equipment with a tool cooling system and pedestal

Denomination	Parameter value
Largest apparent drilling diameter, mm	12
Distance from the spindle axis to the generating column (overhang), mm, no less	190
Distance from the lower end of the spindle to the working surface of the plate; mm:
most, no less	450
least, no more	100
Most spindle stroke, mm	100
Most drill head stroke, mm	250
Spindle taper size	V18 GOST 9953
Working surface dimension of the plate, mm
width	250
length	250
Number of T-grooves	2
Distance between grooves	100
Groove width, mm	14 Н14
Number of spindle speeds	5
Spindle speed limits, rpm	450, 800, 1400, 2500, 4500*
Overall dimensions of the machine, mm, no more
width	420
length	780
height	982
Machine weight, kg, no more	100
Pedestal dimensions (L x H x H), mm, no more	505х405х720
Pedestal weight, kg, no more	38
Cooling system dimensions (L x B x H), mm, no more	350х250х365
Cooling system weight, kg	10,5
Electrical equipment characteristics
Type of supply current	three-phase, alternating

Current frequency, Hz	50± 1
Voltage, V
supply network	380±38
control circuit	220
Electric motor of the main drive characteristics
rated power, kW	0,55
rotation frequency, min ^-1	1500 synchronous

Equipment class to GOST
GOST 12.2.007.0-75	I

Designation	Denomination	Number	Note
044.0000.000	Complete machine	1
Documents
044.0000.000 РЭ	Manual	1
At the request of the consumer, the machine can be supplied with
	Drill chuck
	6150-4029-01	1
	TU RB 00223728.021

	Vise 7200-0210	1
	GOST 16518 – 96
Possible to replace the included accessories with accessories with the same technical data.

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022